Computer, Electronics, and Information Technology symposium

Topics Publications Editorial policy Committees
Topics

Artificial intelligence, Bioinformatics, Computational sciences, Computer graphics, Computer vision, Data sciences, Decision support system, E-government, Game design, Information system security, Knowledge discovery and data mining, Medical Informatics, Mobile computation, Modeling and simulation, Multimedia applications and technologies, Parallel computation, Pattern recognition, Signal and image processing, Soft computing, Software engineering and software testing, Web technology, Adaptive control, Antennas, Biomedical electronics, Cognitive radio, Computer-aided – electronics design and technology, Control of infinite-dimensional systems, Control theory and applications, Cooperative communications, Device material and manufacturing technology, Embedded systems and SoC design, Geometric control theory and applications, Green design for VLSI and microelectronic circuits, Heterogeneous networks, Industrial automation and control systems technology, Information theory and coding systems, Intelligent control, Internet of things, Machine-to-machine (M2M) communications, Mobile computing, Multimedia communications, Network security, Photonic and optoelectronic circuits, Computational methods and reliability, Electricity markets and business models, Energy conservation and efficiency, Energy storage, FACTS, Future integrated electric power system, HVDC, Integrated energy system planning, Microgrids and remote communities, Policies and smart grids, Power electronics, Propagation and channel modeling, Radio resource management and optimization, Renewable energy: generation and integration, RF devices and circuits, Robotics and autonomous systems, Robust and nonlinear control, Satellite communications, Signal processing for communications, Smart grids: existing and emerging technologies, Spread spectrum systems, Ultra-wideband technology, Vehicular communication systems, Wireless Ad-hoc and sensor networks, and Sensors and sensor systems.

Publication

The accepted and presented papers has been submitted for possible inclusion to journals/proceedings that are indexed by Scopus/CPCI/DOAJ: Scientific.Net.



Committees

Scientific committee:
Unan Yusmaniar Oktiawati, Ph.D. (Universitas Gadjah Mada, Indonesia)

Technical program committee:
Azkario Rizky Pratama, S.T., M.Eng., Ph.D. (Universitas Gadjah Mada, Indonesia)
Muhammad Alfian Amrizal, B.Eng., M.I.S., Ph.D. (Universitas Gadjah Mada, Indonesia)
Dr. Lukman Heryawan, ST, MT (Universitas Gadjah Mada, Indonesia)
Yunita Sari, S.Kom., M.Sc., Ph.D. (Universitas Gadjah Mada, Indonesia)
Faizal Makhrus, S.Kom., M.Sc., Ph.D. (Universitas Gadjah Mada, Indonesia)
Prof. Dr.-Ing. Mhd. Reza M. I. Pulungan, S.Si., M.Sc. (Universitas Gadjah Mada, Indonesia)
Arif Nurwidyantoro, S.Kom., M.Cs., Ph.D. (Universitas Gadjah Mada, Indonesia)
Dr. Dyah Aruming Tyas, S.Si. (Universitas Gadjah Mada, Indonesia)
Syukron Abu Ishaq Alfarozi, ST, Ph.D. (Universitas Gadjah Mada, Indonesia)
Dr. Guntur Dharma Putra (Universitas Gadjah Mada, Indonesia)
Teguh Bharata Adji, S.T., M.T., M.Eng., Ph.D. (Universitas Gadjah Mada, Indonesia)
Ahmad Ataka Awwalur Rizqi, ST, Ph.D. (Universitas Gadjah Mada, Indonesia)
Dr. Ahmad Nasikun, ST, M.Sc. (Universitas Gadjah Mada, Indonesia)
Dr.Eng. Ir. Sunu Wibirama, ST, M.Eng., IPM. (Universitas Gadjah Mada, Indonesia)
Ir. Adhistya Erna Permanasari, ST, MT, Ph.D. (Universitas Gadjah Mada, Indonesia)
Dr. Indriana Hidayah, S.T., M.T. (Universitas Gadjah Mada, Indonesia)
Dr. Eng. Silmi Fauziati, ST, MT. (Universitas Gadjah Mada, Indonesia)
Dr. I Wayan Mustika, S.T., M.Eng. (Universitas Gadjah Mada, Indonesia)
Dr. Ronald Adrian, S.T., M.Eng. (Universitas Gadjah Mada, Indonesia)
Yuris Mulya Saputra, S.T., M.Sc., Ph.D. (Universitas Gadjah Mada, Indonesia)
Dr.Eng. Tika Erna Putri, S.Si., M.Sc. (Universitas Gadjah Mada, Indonesia)
Wijayanti Dwi Astuti, S.Si., M.Sc., Ph.D. (Universitas Gadjah Mada, Indonesia)
Dr. Fahmizal, S.T., M.Sc. (Universitas Gadjah Mada, Indonesia)
Dr. Fitri Puspasari, S.Si., M.Sc (Universitas Gadjah Mada, Indonesia)
Dr.Eng. Ganjar Alfian, S.T., M.Eng. (Universitas Gadjah Mada, Indonesia)
Airlangga Adi Hermawan, S.T., M.Sc., Ph.D. (Universitas Gadjah Mada, Indonesia)

Preparing paper Templates Related documents 💡 Learning tips
Preparing your paper
  1. The paper topic should align with the scope of the symposium, as well as the publisher's guidelines, to ensure relevance to the event's focus. This ensures that the submitted work is pertinent to the conference's objectives and will be of interest to the attendees and readers.
  2. The submitted paper must be an original work and should not have been previously published or presented at another meeting (similarity score no more than 25%). 💡 To ensure the paper's authenticity, it is recommended to use the Similarity Checker feature available in the Editor pane of Microsoft Word to check the paper against online sources.
  3. The paper should be written in English (US), with font type Helvetica or Arial (for paper title, authors' information, and keywords) and Times New Roman (for all contents, included figures and tables).
  4. The abstract should be concise and no longer than 200 words, excluding the abstract title, authors, and affiliations. It should be formatted in a two-column layout on A4 paper size in DOC/DOCX/RTF/ZIP and PDF format. Furthermore, the paper should be at least four pages long or six pages in maximum.
  5. The template, modified in Microsoft Word and saved as a DOCX file for PC compatibility, offers authors a comprehensive set of formatting guidelines for preparing electronic versions of their papers. You can access the downloadable DOCX template here ↧. This template includes built-in specifications for margins, column widths, line spacing, font sizes, and font types, ensuring a professional and consistent appearance for your submissions.
    • Font types. Times, Times Roman, or Times New Roman.
    • Font sizes. Title and author name (14 pt);
    • Author information and Keywords (11 pt); Content (12 pt);
    • Margins. Top (25 mm); Bottom (15 mm); Left and Right (20 mm); and
    • Please ensure that all fonts are embedded, not as encrypted/secured file, and has no headers, footers, bookmarks, form fields, links, or annotation. 💡 For further assurance, we recommend utilizing the PDF analyzer ↗︎ provided by EDP Sciences to inspect the document and guarantee that the submitted paper meet the required standards.
  6. To ensure optimal print quality, it is crucial that the listed artworks are provided with the highest resolution suitable for printing, specifically 300 DPI (dots per inch). 💡 For further assurance, we recommend utilizing the PDF analyzer ↗︎ provided by EDP Sciences to inspect the document and guarantee that the artworks meet the required standards.
  7. When incorporating tables and figures from external sources into your paper, ensure that the original work is written in English (US) and that you have obtained the necessary permissions from the copyright holder. Additionally, include a proper credit in your paper to acknowledge the source and comply with copyright regulations.
  8. For both primary and co-authors, it is essential to provide complete credentials, including full names and email addresses. If co-authors are affiliated with multiple institutions, the secondary institution(s) and the investigators associated with each institution must be listed. Please note that the author name order should not be reversed unless explicitly instructed by the publisher. Additionally, affiliations and author names should not include professional titles, such as "Professor", "Graduate Student Researcher", "HOD", "Lecturer", "Alumnus", etc., to maintain consistency and clarity.
  9. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below).
Downloadable templates and related documents
Docx paper template 26 KB
LaTeX paper template Overleaf
Policy & ethics

💡 Learning tips
Check similarity with Microsoft Editor
Use styles in Microsoft Word
Embed all fonts in Microsoft Word
Check document's content

To participate as a presenter in this symposium, there are seven steps that you need to follow.

Before submitting your paper, the authors need to have a Scientific.Net account. If you already have a Scientific.net account, you can go to the next step to activate your registered account.

1. Go to the Scientific.net site

Type Scientific.net on your browser and click Register now below the login form.

2. Entry your details

Type your information in the required fields (marked with an asterisk), you can complete other information after the registration.

3. Verify your account

Verify your account by clicking the link in your email.



Your account has been created!

Now, you can go to the next step to activate your account.

Before submitting your paper, the authors need to activate their Scientific.net account.

Type your Scientific.net account details in the activation request form by clicking the button below.

Request activation

If you still didn't get the email from the editors, feel free to contact us. Please note that we use a third-party software, so you cannot request in the end of time.

Your account has been activated!

Now, you can go to the next step to submit your paper in the system.

After activating a Scientific.Net account, you can submit your paper in the system. To maximize our services, you need to complete the following details before submitting your paper:

  • the email address of all authors in your paper.
  • paper format and content in accordance with the author guidelines.
Submit my paper  Read editorial policy

1. Log in to the Scientific.Net site

Type scientific.net and log in to your registered account.

2. Read Trans Tech Publications Ltd.' policy and ethics

Once you are logged in, click the Author on the top menu.

Click Policies and Ethics under the Author home tab to view the Trans Tech Publications Ltd.' Policy and Ethics.

Please read it carefully before starting to upload your paper.

3. Go to symposium's tab

On the Author home tab, click Upload page to begin the paper submission.

Select radio button and click Continue.

Select the radio button before your co-author’s name and click Select this person button to confirm it.

4. Entry your paper details

On the Edit paper tab, browse your DOC / DOCX / RTF / ZIP and PDF files. Click Upload button to start uploading. The uploaded files should be less than 64 MB.

Type your paper title and abstract, then click Update.

5. Select your corresponding author

Add your co-authors account by clicking Add new button under Edit authors tab. Find your co-authors account by their names, emails, or ORCID.

Click the radio button to select your corresponding author.

6. Add your paper's keywords

Add your paper's keyword by clicking Add button after writing it in the box. Use the toolbar to type an unusual character, e.g., Latin expressions, mathematical and chemical formulas, or Greek symbols.

7. Sign the copyright agreement

Read the copyright agreement carefully. Select radio button on "Author's own work", tick the box "I confirm that I have been entitled by all authors to sign this Agreement on their behalf", and click Accept button.

Your agreement has been signed. You can download your agreement by clicking on the PDF icon.

8. Tick the checklist

Tick all required fields (marked with an asterisk) and finish it by clicking Submit button.

Your paper has been submitted. You can watch the tutorial video on the Author home tab.

If you still require further assistance, please feel free to contact us.

Your paper has been uploaded!

Your paper is under review process and we will notify you again soon.

Your paper will go to the blind review. You can check the status of your paper anytime from your account in the Scientific.Net. We will notify you too via email when the review process was finished.

Check my paper  Read editorial policy

If your paper has been accepted for presentation at the conference, please ensure that you pay the conference fee prior to uploading the revised paper. Note that each paper can only be presented by one author, but one author can present multiple papers.

Check my paper ID  Read payment procedure

The 5th step of the submission process has been completed.

You can now prepare your revised paper and presentation document while awaiting verification of your payment.

To complete the submission process, please navigate to the EDAS dashboard page ↗︎ and click on your paper title. Then, upload your presentation in PPT, PPTX, or PDF format by clicking the cloud icon in the Presentation section. Additionally, ensure that you approve the public release (if applicable).

If you encounter any difficulties during the upload process, please do not hesitate to contact us. Please note that any presentations not received by the deadline will be considered as no-shows, in accordance with the non-presented paper policy.

Submit presentation document

Your presentation document has been submitted!

Your presentation document has been successfully submitted. Next, please ensure that you are available to present on October 23-24. If you are unable to present on the scheduled day, your paper will be considered as no-shows in accordance with the non-presented paper policy.

Following the submission of your revised paper and presentation document, it is essential that you participate in the live Q&A session at the conference. Please ensure that you allocate time on October 23-24 in Yogyakarta, Indonesia, as the conference program is non-negotiable and must adhere to the schedule provided by the organizing committee.

In the event that you are unable to attend, please arrange for one of your co-authors to represent you. Any changes to attendance will result in a corresponding change to the name listed on the certificate, which will be sent via email.